PURAVENT

The UV Bio-Wall provides a “barrier wall” of UV Energy destroying biological and chemical contaminants passing through it. Each Bio-Wall has 5 High Intensity 19mm Pure Fused Quartz Lamps, which are mounted to Aluminium Anodized Parabolic Reflectors that reflect the full 360° of Germicidal Radiation. The Bio-Wall is mounted parallel to the air stream in order to maximize the contaminant’s contact time with the UV Energy. In addition to the lamp array the Bio-Wall is equipped with a ballast housing which is usually located on the outside of the duct adjacent to the Biowall array on the inside. The ballast box has contacts enabling connection to a BMS system for remote monitoring and switching.

• 18" Diameter Oscillating wall mount fan • Our rugged industrial wall fan mounts to the wall for safe, out-of-the-way operation. • The highly efficient PSC type ball bearing motor is permanently lubricated and enclosed for longer life and operates at 3 speeds. • To direct airflow up and down, the fan head pivots vertically. Quiet fan blades are balanced for efficient air distribution and safely enclosed in steel wire guards • Wall mount fan operates with a pull chain switch and 3 prong power cord. •Suitable for any application requiring the movement of air - Gyms, office, home, work shop, showroom.

ECOPOL solid fuel heaters have been designed to burn waste wood or logs to produce industrial quantities of heat delivered onto an air flow via its integral heat exchanger. The result is a space heater that looks a bit like a cross between a large wood stove and a conventional ‘bullet’ style space heater. These solid fuel heaters are solid and robust steel plate construction and once installed will provide years of heat from your waste wood for the cost of powering the fan. Please note that this is not a domestic heater but is an ideal solid fuel heater for warming up larger wood processing and wood working facilities. The tube heat exchanger in the top of the heater ensures that once lit, heat can be delivered quickly and easily on the air flow through the tubes. The EP-050C and EP-100C models are fitted with a centrifugal fan and are suitable for connection of ductwork, to distribute warmed air to other areas of the room or even through to adjacent rooms.

The Airius PHI air purification and odour control unit incorporates a UV/HE light cell into the nozzle of a standard Airius destratification fan. This cell emits natural air purifiers called ionised hydroperoxides, which the fan circulates fully throughout the space. This significantly improves indoor air quality (IAQ) reducing viruses, bacteria, gases, VOCs (Volatile Organic Compounds), mould and odours by over 90%, whilst an advanced atmosphere oxidisation technology give indoor environments fresh, clean and odour free air. This is in addition to the standard features and benefits of the Airius destratification system. The Airius PHI Air Purification and Odour Control System the perfect low cost solution for hospitals, care homes, doctors & dentist surgery’s, children’s nursery’s and food preparation facilities etc. in maintaining a clean, healthy and odour free environment.