Descriptif
AC axial fan Motor: M2D074-DF Technical description Mass 4.2 kg Size 300 mm Surface of rotor Coated in black Material of terminal box ABS plastic Material of blades Sheet steel, coated in black Material of guard grille Steel, coated in black plastic (RAL9005) Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 44 / Depending on installation and position as per EN 60034-5 Insulation class "F" Humidity (F)/environmental protection class (H) F1-2 Max. permissible ambient motor temp. (transp./ storage) + 80 °C Min. permissible ambient motor temp. (transp./storage) - 40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) < 0,75 mA Electrical leads Via terminal box, integrated capacitor connected via terminal box Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 60335-1, motor does not have factory-installed overheating protection / CE Approval EAC / CCC
Caractéristiques du produit
Mass | 4.2 kg |
Size | 300 mm |
Surface of rotor | Coated in black |
Material of terminal box | ABS plastic |
Material of blades | Sheet steel, coated in black |
Material of guard grille | Steel, coated in black plastic (RAL9005) |
Direction of air flow | "V" |
Direction of rotation | Counter-clockwise, seen on rotor |
Type of protection | IP 44 / Depending on installation and position as per EN 60034-5 |
Insulation class | "F" |
Humidity (F)/environmental protection class (H) | F1-2 |
Max. permissible ambient motor temp. (transp./ storage) | + 80 °C |
Min. permissible ambient motor temp. (transp./storage) | - 40 °C |
Mounting position | Shaft horizontal or rotor on bottom; rotor on top on request |
Condensate discharge holes | Rotor-side |
Cooling bore / aperture | On rotor sides |
Motor bearing | Ball bearing |
Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) | < 0,75 mA |
Electrical leads | Via terminal box, integrated capacitor connected via terminal box |
Cable exit | Variable |
Protection class | I (if protective earth is connected by customer) |
Product conforming to standard | EN 60335-1, motor does not have factory-installed overheating protection / CE |
Approval | EAC / CCC |
AUTRES PRODUITS DE CETTE ENTREPRISE
-
le nouveau diffuseur ebm-papstAxiTop
VOIR LA PAGE PRODUIT
-
Nouveau moteur ebm-papst ATEX
VOIR LA PAGE PRODUIT
-
Des viroles de ventilateurs en biomatériau
VOIR LA PAGE PRODUIT
-
ventilateurs hélicoïdesHyBlade®
VOIR LA PAGE PRODUIT