Descriptif

EC axial fan Motor: M3G200-LA Technical description Mass 65 kg Size 1250 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium, coated in black Material of blades Die-cast aluminium, coated in black Number of blades 5 Blade angle 0° Direction of air flow "A" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity (F)/environmental protection class (H) F5 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on top Condensate discharge holes On the stator side Cooling bore / aperture On stator sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - External release input - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 2-bit - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / EAC / NA / UL 1004-7 + 60730

Caractéristiques du produit

Mass 65 kg
Size 1250 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium, coated in black
Direction of air flow "A"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 54
Insulation class "F"
Max. permissible ambient motor temp. (transp./ storage) +80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Shaft horizontal or rotor on top
Condensate discharge holes On the stator side
Cooling bore / aperture On stator sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor
Electrical leads Via terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / EAC / NA / UL 1004-7 + 60730

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :