Descriptif
EC axial fan - HyBlade Motor: M3G150-IF Technical description Mass 25.6 kg Size 710 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium, coated in black Material of blades Aluminium sheet insert (coated in black), sprayed with PP plastic Number of blades 5 Blade angle 0° Direction of air flow "A" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity (F)/environmental protection class (H) F5 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharge holes On the stator side Cooling bore / aperture On stator sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and alarm display - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - External release input - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC interference emission Acc. to EN 61000-6-3 (household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1
Caractéristiques du produit
Mass | 25.6 kg |
Size | 710 mm |
Surface of rotor | Coated in black |
Material of electronics housing | Die-cast aluminium, coated in black |
Material of blades | Aluminium sheet insert (coated in black), sprayed with PP plastic |
Direction of air flow | "A" |
Direction of rotation | Counter-clockwise, seen on rotor |
Type of protection | IP 54 |
Insulation class | "F" |
Max. permissible ambient motor temp. (transp./ storage) | +80 °C |
Min. permissible ambient motor temp. (transp./storage) | -40 °C |
Mounting position | Shaft horizontal or rotor on top; rotor on bottom on request |
Condensate discharge holes | On the stator side |
Cooling bore / aperture | On stator sides |
Motor bearing | Ball bearing |
Technical features | - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and al |
EMC interference immunity | Acc. to EN 61000-6-2 (industrial environment) |
EMC interference emission | Acc. to EN 61000-6-3 (household environment) |
Electrical leads | Via terminal box |
Motor protection | Reverse polarity and locked-rotor protection |
Protection class | I (if protective earth is connected by customer) |
Product conforming to standard | EN 61800-5-1 / CE |
Approval | UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1 |
AUTRES PRODUITS DE CETTE ENTREPRISE
-
le nouveau diffuseur ebm-papstAxiTop
VOIR LA PAGE PRODUIT
-
Nouveau moteur ebm-papst ATEX
VOIR LA PAGE PRODUIT
-
Des viroles de ventilateurs en biomatériau
VOIR LA PAGE PRODUIT
-
ventilateurs hélicoïdesHyBlade®
VOIR LA PAGE PRODUIT