Descriptif

EC axial fan - HyBlade Motor: M3G084-GF Technical description Mass 5.8 kg Size 630 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium Material of blades Press-fitted sheet steel blank, sprayed with PP plastic Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 / Depending on installation and position Insulation class "B" Humidity (F)/environmental protection class (H) F3-1 Max. permissible ambient motor temp. (transp./ storage) + 80 °C Min. permissible ambient motor temp. (transp./storage) - 40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC harmonics Acc. to EN 61000-3-2/3 EMC interference emission Acc. to EN 55022 (Class B, household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Motor protection Thermal overload protector (TOP) wired internally Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval EAC

Caractéristiques du produit

Mass 5.8 kg
Size 630 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium
Material of blades Press-fitted sheet steel blank, sprayed with PP plastic
Direction of air flow "V"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 54 / Depending on installation and position
Insulation class "B"
Humidity (F)/environmental protection class (H) F3-1
Max. permissible ambient motor temp. (transp./ storage) + 80 °C
Min. permissible ambient motor temp. (transp./storage) - 40 °C
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes Rotor-side
Cooling bore / aperture On rotor sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC harmonics Acc. to EN 61000-3-2/3
EMC interference emission Acc. to EN 55022 (Class B, household environment)
Motor protection Thermal overload protector (TOP) wired internally
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval EAC

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :