Descriptif

EC axial fan - HyBlade Motor: M3G112-EA Technical description Mass 8.8 kg Size 560 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium, coated in black Material of blades Aluminium sheet insert (coated in black), sprayed with PP plastic Number of blades 5 Blade angle -5° Direction of air flow "A" Direction of rotation Clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity (F)/environmental protection class (H) F4-2 Max. permissible ambient motor temp. (transp./ storage) 80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on top Condensate discharge holes On the stator side Cooling bore / aperture On stator sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and alarm display - Direction of rotation selection counter-clockwise / clockwise - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - Alarm relay - Integrated PID controller - Motor current limit - PFC, active - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC harmonics Acc. to EN 61000-3-2/3 EMC interference emission Acc. to EN 55022 (Class A, industrial environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Thermal overload protector (TOP) wired internally Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval EAC

Caractéristiques du produit

Mass 8.8 kg
Size 560 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium, coated in black
Material of blades Aluminium sheet insert (coated in black), sprayed with PP plastic
Blade angle -5°
Direction of air flow "A"
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "B"
Humidity (F)/environmental protection class (H) F4-2
Max. permissible ambient motor temp. (transp./ storage) 80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Shaft horizontal or rotor on top
Condensate discharge holes On the stator side
Cooling bore / aperture On stator sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and al
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC harmonics Acc. to EN 61000-3-2/3
EMC interference emission Acc. to EN 55022 (Class A, industrial environment)
Electrical leads Via terminal box
Motor protection Thermal overload protector (TOP) wired internally
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval EAC

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :