Descriptif
EC axial fan - HyBlade Motor: M3G074-CF Technical description Mass 2.3 kg Size 400 mm Material of blades Press-fitted sheet steel blank, sprayed with PP plastic Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity (F)/environmental protection class (H) F3-1 Max. permissible ambient motor temp. (transp./ storage) + 80 °C Min. permissible ambient motor temp. (transp./storage) - 40 °C Mounting position Any Condensate discharge holes None, open rotor Cooling bore / aperture Rotor-side Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 1.1 mA - Tach output - Output limit - Motor current limit - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Motor protection PTC resistor Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 60335-1 / CE Approval UL 1004-7 + 60730 / CCC / C22.2 Nr.77 + CAN/CSA-E60730-1
Caractéristiques du produit
Mass | 2.3 kg |
Size | 400 mm |
Material of blades | Press-fitted sheet steel blank, sprayed with PP plastic |
Direction of air flow | "V" |
Direction of rotation | Counter-clockwise, seen on rotor |
Type of protection | IP 54 |
Insulation class | "B" |
Humidity (F)/environmental protection class (H) | F3-1 |
Max. permissible ambient motor temp. (transp./ storage) | + 80 °C |
Min. permissible ambient motor temp. (transp./storage) | - 40 °C |
Mounting position | Any |
Condensate discharge holes | None, open rotor |
Cooling bore / aperture | Rotor-side |
Motor bearing | Ball bearing |
Technical features | - Output 10 VDC, max. 1.1 mA - Tach output - Output limit - Motor current limit - Soft start - Contr |
Motor protection | PTC resistor |
Cable exit | Variable |
Protection class | I (if protective earth is connected by customer) |
Product conforming to standard | EN 60335-1 / CE |
Approval | UL 1004-7 + 60730 / CCC / C22.2 Nr.77 + CAN/CSA-E60730-1 |
AUTRES PRODUITS DE CETTE ENTREPRISE
-
le nouveau diffuseur ebm-papstAxiTop
VOIR LA PAGE PRODUIT
-
Nouveau moteur ebm-papst ATEX
VOIR LA PAGE PRODUIT
-
Des viroles de ventilateurs en biomatériau
VOIR LA PAGE PRODUIT
-
ventilateurs hélicoïdesHyBlade®
VOIR LA PAGE PRODUIT