Descriptif

EC axial fan - HyBlade Motor: M3G150-NA Technical description Mass 32 kg Size 910 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium, coated in black Material of blades Aluminium sheet insert (coated in black), sprayed with PP plastic Number of blades 5 Blade angle 0° Direction of air flow "A" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity (F)/environmental protection class (H) F5 Max. permissible ambient motor temp. (transp./ storage) + 80 °C Min. permissible ambient motor temp. (transp./storage) - 40 °C Mounting position Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharge holes On the stator side Cooling bore / aperture On stator sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and alarm display - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - External release input - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC interference emission Acc. to EN 61000-6-3 (household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1

Caractéristiques du produit

Mass 32 kg
Size 910 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium, coated in black
Material of blades Aluminium sheet insert (coated in black), sprayed with PP plastic
Direction of air flow "A"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 54
Insulation class "F"
Max. permissible ambient motor temp. (transp./ storage) + 80 °C
Min. permissible ambient motor temp. (transp./storage) - 40 °C
Mounting position Shaft horizontal or rotor on top; rotor on bottom on request
Condensate discharge holes On the stator side
Cooling bore / aperture On stator sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and al
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC interference emission Acc. to EN 61000-6-3 (household environment)
Electrical leads Via terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :