Descriptif
EC axial fan - HyBlade Motor: M3G084-GF Technical description Mass 5.9 kg Size 630 mm Surface of rotor Coated in black Material of terminal box PC / ABS plastic Material of electronics housing Die-cast aluminium Material of blades Press-fitted sheet steel blank, sprayed with PP plastic Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity (F)/environmental protection class (H) F3-1 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC harmonics Acc. to EN 61000-3-2/3 EMC interference emission Acc. to EN 61000-6-3 (household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Thermal overload protector (TOP) wired internally Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval EAC
Caractéristiques du produit
Mass | 5.9 kg |
Size | 630 mm |
Surface of rotor | Coated in black |
Material of terminal box | PC / ABS plastic |
Material of electronics housing | Die-cast aluminium |
Material of blades | Press-fitted sheet steel blank, sprayed with PP plastic |
Direction of air flow | "V" |
Direction of rotation | Counter-clockwise, seen on rotor |
Type of protection | IP 54 |
Insulation class | "B" |
Humidity (F)/environmental protection class (H) | F3-1 |
Max. permissible ambient motor temp. (transp./ storage) | +80 °C |
Min. permissible ambient motor temp. (transp./storage) | -40 °C |
Mounting position | Shaft horizontal or rotor on bottom; rotor on top on request |
Condensate discharge holes | Rotor-side |
Cooling bore / aperture | On rotor sides |
Motor bearing | Ball bearing |
Technical features | - Output 10 VDC, max. 10 mA - Alarm relay - Motor current limit - PFC, active - Soft start - Control |
EMC interference immunity | Acc. to EN 61000-6-2 (industrial environment) |
EMC harmonics | Acc. to EN 61000-3-2/3 |
EMC interference emission | Acc. to EN 61000-6-3 (household environment) |
Electrical leads | Via terminal box |
Motor protection | Thermal overload protector (TOP) wired internally |
Protection class | I (if protective earth is connected by customer) |
Product conforming to standard | EN 61800-5-1 / CE |
Approval | EAC |
AUTRES PRODUITS DE CETTE ENTREPRISE
-
le nouveau diffuseur ebm-papstAxiTop
VOIR LA PAGE PRODUIT
-
Nouveau moteur ebm-papst ATEX
VOIR LA PAGE PRODUIT
-
Des viroles de ventilateurs en biomatériau
VOIR LA PAGE PRODUIT
-
ventilateurs hélicoïdesHyBlade®
VOIR LA PAGE PRODUIT