Descriptif

EC axial fan - HyBlade Motor: M3G084-FA Technical description Mass 4.8 kg Size 450 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium Material of blades Press-fitted sheet steel blank, sprayed with PP plastic Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity (F)/environmental protection class (H) F3-1 Max. permissible ambient motor temp. (transp./ storage) 80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 1.1 mA - Alarm relay - Motor current limit - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC harmonics Acc. to EN 61000-3-2/3 EMC interference emission Acc. to EN 61000-6-3 (household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Motor protection Thermal overload protector (TOP) wired internally Cable exit Variable Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 Approval UL 2111 / EAC / CSA C22.2 No.77 / CCC

Caractéristiques du produit

Mass 4.8 kg
Size 450 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium
Material of blades Press-fitted sheet steel blank, sprayed with PP plastic
Direction of air flow "V"
Direction of rotation Counter-clockwise, seen on rotor
Type of protection IP 54
Insulation class "B"
Humidity (F)/environmental protection class (H) F3-1
Max. permissible ambient motor temp. (transp./ storage) 80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes Rotor-side
Cooling bore / aperture On rotor sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 1.1 mA - Alarm relay - Motor current limit - Soft start - Control input 0-10 V
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC harmonics Acc. to EN 61000-3-2/3
EMC interference emission Acc. to EN 61000-6-3 (household environment)
Motor protection Thermal overload protector (TOP) wired internally
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1
Approval UL 2111 / EAC / CSA C22.2 No.77 / CCC

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :