Descriptif

EC centrifugal fan - RadiPac Motor: M3G084-GF Technical description Mass 7.1 kg Size 280 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium Material of impeller Aluminium sheet Number of blades 7 Direction of rotation Clockwise, seen on rotor Type of protection IP 54 Insulation class "B" Humidity (F)/environmental protection class (H) F3-1 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Thermal overload protector (TOP) wired internally Protection class I (if protective earth is connected by customer at the connection point of the housing) Product conforming to standard EN 61800-5-1 / CE Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / CCC / EAC / UL 1004-7 + 60730

Caractéristiques du produit

Mass 7.1 kg
Size 280 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium
Material of impeller Aluminium sheet
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "B"
Humidity (F)/environmental protection class (H) F3-1
Max. permissible ambient motor temp. (transp./ storage) +80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes Rotor-side
Cooling bore / aperture On rotor sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor
Electrical leads Via terminal box
Motor protection Thermal overload protector (TOP) wired internally
Protection class I (if protective earth is connected by customer at the connection point of the housing)
Product conforming to standard EN 61800-5-1 / CE
Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / CCC / EAC / UL 1004-7 + 60730

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :