Descriptif

EC centrifugal module - RadiPac Motor: M3G150-NA Technical description Mass 70 kg Size 710 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium Material of impeller Aluminium sheet Material of mounting plate Sheet steel, galvanised Material of support bracket Steel, coated in black Material of inlet nozzle Sheet steel, galvanised Number of blades 7 Direction of rotation Clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity (F)/environmental protection class (H) F4-1 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and alarm display - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - External release input - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1

Caractéristiques du produit

Mass 70 kg
Size 710 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium
Material of impeller Aluminium sheet
Material of mounting plate Sheet steel, galvanised
Material of support bracket Steel, coated in black
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "F"
Humidity (F)/environmental protection class (H) F4-1
Max. permissible ambient motor temp. (transp./ storage) +80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Shaft horizontal or rotor on bottom; rotor on top on request
Condensate discharge holes Rotor-side
Cooling bore / aperture On rotor sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Operation and al
Electrical leads Via terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval UL 1004-7 + 60730 / EAC / C22.2 Nr.77 + CAN/CSA-E60730-1

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :