Descriptif

EC centrifugal module - RadiPac Motor: M3G150-FF Technical description Mass 32 kg Size 400 mm Surface of rotor Coated in black Material of electronics housing Die-cast aluminium, coated in black Material of impeller Aluminium sheet, coated in black Material of mounting plate Sheet steel, hot-galvanised and coated in black Material of support bracket Steel, galvanised and coated in black Material of inlet nozzle Sheet steel, hot-galvanised and coated in black Number of blades 7 Direction of rotation Clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity (F)/environmental protection class (H) F4-2 Max. permissible ambient motor temp. (transp./ storage) +80 °C Min. permissible ambient motor temp. (transp./storage) -40 °C Mounting position Refer to product drawing Condensate discharge holes Rotor-side Cooling bore / aperture On rotor sides Operation mode S1 Motor bearing Ball bearing Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (programming) - External release input - Alarm relay - Integrated PID controller - Motor current limit - PFC, passive - RS485 MODBUS RTU - Soft start - Control input 0-10 VDC / PWM - Over-temperature protected electronics / motor - Line undervoltage / phase failure detection EMC interference immunity Acc. to EN 61000-6-2 (industrial environment) EMC interference emission Acc. to EN 61000-6-3 (household environment) Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) Electrical leads Via terminal box Motor protection Reverse polarity and locked-rotor protection Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1 / CE Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / EAC / NA / UL 1004-7 + 60730

Caractéristiques du produit

Mass 32 kg
Size 400 mm
Surface of rotor Coated in black
Material of electronics housing Die-cast aluminium, coated in black
Material of impeller Aluminium sheet, coated in black
Material of mounting plate Sheet steel, hot-galvanised and coated in black
Material of support bracket Steel, galvanised and coated in black
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "F"
Humidity (F)/environmental protection class (H) F4-2
Max. permissible ambient motor temp. (transp./ storage) +80 °C
Min. permissible ambient motor temp. (transp./storage) -40 °C
Mounting position Refer to product drawing
Condensate discharge holes Rotor-side
Cooling bore / aperture On rotor sides
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC interference emission Acc. to EN 61000-6-3 (household environment)
Electrical leads Via terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 61800-5-1 / CE
Approval C22.2 Nr.77 + CAN/CSA-E60730-1 / EAC / NA / UL 1004-7 + 60730

AUTRES PRODUITS DE CETTE ENTREPRISE

Voir tous les produits de cette entreprise

Besoin de plus d'informations de la part du vendeur ?

Partager sur :