SYSCOM-PROREP - Parce que demain s’invente aujourd’hui, nos technologies pour l’Innovation

Multi-Band LTE Cat1/GSM + GNSS Dimension: 24*27*2.75mmThe SIM7500E is Multi-Band LTE-FDD/GSM module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.

Nouvelle génération de modules Smart LTE Cat.4 multi-mode avec système d’exploitation Android intégré. Il prend également en charge la communication sans fil à courte portée via IEEE 802.11 b/g/n et BT4.1 LE. SC20 series is Quectel’s new generation of multi-mode Smart LTE Cat.4 modules with built-in Android OS. It contains five variants: SC20-CE, SC20-E, SC20-A, SC20-AU and SC20-J. SC20 series delivers speeds of 150Mbit/s downlink and 50Mbit/s uplink data rates. It is ideal for both industrial and consumer applications requiring the highest data-rate and high-speed internet access. SC20 series is backward-compatible with existing EDGE and GSM/GPRS networks, ensuring that it can be connected even in remote areas devoid of 3G or LTE coverage. It also supports short-range wireless communication via IEEE 802.11 b/g/n (SC20-E/-A/-AU/-J support IEEE 802.11 a/b/g/n) and BT4.1 LE.

Quectel EP06 est une série de modules LTE Advanced Cat.6 optimisés spécialement pour les applications M2M et IoT Quectel EP06 est une série de modules LTE Advanced de catégorie 6 optimisés spécialement pour les applications M2M et IoT. Adoptant la technologie 3GPP Rel. 12 LTE, il offre des vitesses optimisées m2M de 300 Mbit/s downlink et 50Mbit/s uplink taux de données de pointe. Conçu dans le facteur de forme Mini PCIe, EP06 est compatible avec le futur module Cat.9 EP09, le module Cat.12 EP12 et le module Cat.16 EP16 , qui aidera les clients à migrer entre différentes catégories à l’avenir. EP06 contient 4 variantes (EP06-E, EP06-A, EP06-LA et EP06-APAC) qui sont conçues pour différentes régions cibles et couvrent presque tous les principaux transporteurs de flux dans le monde entier. EP06 prend en charge la technologie de localisation Gen8C Lite de Qualcomm™® IZat (GPS, GLONASS, BeiDou, Galileo et QZSS).

Lecteur RFID "Slim" multi-standard, BLE et NFCLe nouveau ELATEC TWN4 Slim est disponible en Juin 2020. Lecteur RFID universel, il est plus petit qu’une carte de crédit. Mesurant seulement 65.5 x 45.5 mm et 4 mm d’épaisseur, il est la solution parfaite pour une intégration où l’espace est une contrainte forte. Comme les autres lecteurs ELATEC de la gamme, le TWN4 Slim sait lire plus de soixante (60) protocoles RFID comme NFC et BLE.

Lecteur de montage mur ou panneau, LF+HF+BLE et interfaces améliorées RS485, RS232, Wiegand, Horloge/Données, USB. Membre à part entière de la famille TWN4 ayant accès à un environnement SSK puissant, à un logement IP65 Enhances interfaces RS485, RS232, Wiegand, Clock/Data, USB Enhanced light concept, up to 5 individually programmable RGB LEDs Infrared tamper detection, front facing OSDP protocol on request Excellent RFID performance Allows enhanced security in your applications Only 43.8 x 40.8 x 28.5 mm (including connector) for OEM PCB version 9 to 30 V power supply Additional micro USB port support Integrated LF + HF + BLE antennas One on-board SAM sockets ID-000 for enhanced security Bluetooth Low Energy BLE module on board Firmware update via USB port Support of options P and PI for additional technologiesLegic version available as well Light” version with reduced set of features available as well

TWN4 MultiTech 3 BLE est un nouveau lecteur compact, 50 x 35 mm seulement, HF + LF & BLE, avec antenne TWN4 MultiTech 3 BLE is new compact reader, 50 x 35 mm only, HF + LF & BLE, with antenna 50 x 35 mm only 125/134.2KHz, 13.56MHz Integrated LF & HF antenna OEM versiononly Micro USB Connector (optionally)

supports TWN4 MultiTech underlying technology 13.56 MHz integrated antenna wireless (re)configurable USB, Serial (logical level 3.3V, CMOS 5V tolerant), SPI, Clock/Data, Wiegand, 1-Wire 4 GPIOs (General Purpose Input/Output) onboard 18 kB flash storage size 33 x 30 x 11 mm development board for interface testing on request

Conseil de développement TWN4 MultiTech Nano avec des interfaces comme UART, USB, GPIO et SAM. The TWN4 MultiTech Nano is a device for reading and writing RFID transponders. It can communicate with a large number of transponder types in the frequency ranges of 125kHz, 134.2kHz and 13.56MHz. This development board allows evaluation of many important interfaces of the TWN4 MultiTech Nano, like UART, USB, GPIO and SAM. Package Contents: Development board TWN4 MultiTech Nano C1 orTWN4 MultiTechNano LEGIC 42 C1 Micro USB cable Lever for TWN4 MultiTechNano/Nano LEGIC 42 2 x sample tags 125kHz 2 x sample tags 13.56MHz

Development Kit TWN4 MultiTech HF Mini ReaderThe Mini Reader is a device for reading and writing RFID transponders. It can communicate with a large range of transponder types in the frequency range of 13.56MHz. This Development Board allows investigation of the most important interfaces of the Mini Reader module, like UART (via USB), GPIO and SAM. Package Contents: Development Board Mini Reader MIFARE Transponder Cable Micro USB / USB-A Rubber feet

RFID Technology Analyzing Toolincludes twelve contactless cards from various RFID technologies as well as two MIFARE Paper Labels LEGIC chip for reading LEGIC RFID standards supports segment initialization function enables on-site identification of RFID cards convenient case